This Digital Slim HID Conversion Kit is a product of years of industry experience and testing. The result is a kit made up of the absolute BEST performing components on the market that will provide GUARANTEED years of reliable operation at an OEM level of quality. It’s a bit of a Frankenstein kit but necessarily so to provide all the top performers together. This includes HYLUXTEK ballasts, CNLight Bulbs, Diode Dynamics Relay (optional) and an impressive 3-YEAR WARRANTY. This is an extremely technical no bulls**t product page spelling out exactly why these components make for one of the best performing HID kits on the market.
The 6000K Temperature HID Bulbs have approximately 2800lm output, which is 3x the light output of the traditional halogen light and slightly less light output compared to the 4300K. Although it has a bit lesser light output, it emits pure whiter light with very slight tint of blue.
BALLASTS (HYLUXTEK 2A88) - This is the most important component in an HID kit because this is what provides the power. HYLUXTEK is proven and universally identified as one of the very best ballast manufacturer in the industry. They manufacture many style HID ballasts but the “2A88 Slim” is one of the main flagship ballasts for the brand. Much of the technology included in the “2A88 Slim” ballasts got them to this point but the attention is mainly surrounding a very key component of the ballast known as the “controller / controller chip”. This controls all functions of the ignition & lamp steady state procedure and ultimately makes or breaks HID function and quality.
Controller Chip (ASIC) - There are two kinds of controller chips used in ballast technology, the standardized “central processing unit” (CPU) controller chip (cheaper programming & development cost (roughly $3,000) and unfortunately an industry standard) and the “application-specific integrated circuit” (ASIC) controller chip (much higher programming & development cost (roughly $600,000) and thus not as commonly used).
1) CPU Controller Chip – Because the CPU program is easy to copy and very low cost you see hundreds of companies developing HID ballasts with generic CPU Controller Chips under many different names. Many of these ballasts do work decently well but are unable to monitor the HID lights correctly. This inability to monitor the lights correctly means that light power changes often making the lights progressively more difficult to control. This overworks the ballasts and the outcome is inconsistency that leads to blowing bulbs, burning out ballasts, and ultimately the culprit in high failure and defect rates in HID kits.
2) ASIC Controller Chip – The cost behind this technology keeps it limited to a very small handful of ballast manufactures. The HYLUXTEX ASIC Controller Chip offers real-time bulb monitoring & power compensation. This allows for extremely stable operation resulting in improved performance and efficiency. Improved performance gives you consistently brighter and fluid light output along with very quick bulb warm-up time. Improved efficiency protects the ballast and lights from being unnecessarily overworked lowering chances of component failure. So much so that HYLUXTEK ballasts hold an impressively low 0.5% defect rate (with over 7 million sold worldwide) and come equipped with an equally impressive 3-year warranty.
CAN-BUS Technology - Many newer vehicles have systems that sense power consumption and adjust output based on information being received. Since HIDs use less power than factory halogen bulbs, this can often cause powering & failure issues. Often times you can resolve this by adding capacitors, known as warning cancellers, or some ballasts come with them built-in. In many cases however, these parts are ineffective due to the advanced nature of the systems in place on the vehicle. Furthermore many of these newer vehicle systems use pulse-width-modulation (PWM) to drive headlights, which basically sends a pulsing power signal to power the lights to help extend bulb life. This is great technology for halogen bulbs but can be damaging to HID components if not circumvented correctly. The solution to these issues is known as a CAN-BUS module. This module is designed specifically for smoothing PWM signals up to 100hz, and providing feedback to the vehicle to equalize the load. This will defeat even the most troublesome modern vehicle systems, and even if your vehicle does not share these issues, the module will still provide a smoother power flow for reliable operation. Simply put, this ballast will work on any vehicle, the first time you plug it in, and no need to worry about capacitors, warning cancellers, or resistors.
Igniter and Startup - Igniter issues when starting your lights up are common in inferior ballasts, especially in cold climates. Small igniters that are not rated for extreme temperatures are generally the issue. HYLUXTEK uses an OEM-grade 24kV external igniter that is tested and proven to ignite seamlessly even in the coldest temperatures (rated for up to -40 degree operating temps). Additionally, the ASIC chip in these ballasts requires very little power (only 4 amps at nominal voltage) to start up. Consuming less power paired with a beefed up igniter makes for reliable fast startups, every time.
Ballast Housing - The ballast housing is completely filled & potted making for a solid structure that is fully waterproof and shockproof. It’s common to see lower quality ballasts only given a coating, or partial fill, which is more cost effective but inadequately protects the ballast internals. The ballast housing is very compact in size (about the size of a deck of playing cards) with a built in bracket for easy mounting.
HID BULBS (CNLighting) - Though most notable HID technology is built within the ballasts, it’s also important not to pair that technology with poor quality HID bulbs. CNLighting is at the top of the list when it comes to proven HID bulb quality and performance and is often seen paired with many other high end HID kits on the market. These 35w CNLighting bulbs feature flicker-free performance, true color temperature ratings (with no variance in output), are rated for extreme operating temperatures, have an expected lifespan of over 2000 hours, and include ceramic base for heat protection when applicable.
WIRING HARNESS RELAY (Diode Dynamics) - The Diode Dynamics wiring relay is a heavy duty harness designed to power your HID kit directly from the battery, rather than the factory wiring harness. This features a fully-sealed waterproof 40 AMP relay, 30 AMP in-line fuse, and all wires are sleeved with braided techflex for an attractive appearance and extra protection. The input wires are each a meter long, and the output wires are one meter and two meters, which means the wiring will be long enough for even the biggest vehicles.
Do I Need This? - The wiring harness relay is an optional part and is NOT required for operation of the HID kit in most vehicles. However, please be aware that some vehicles may require it for operation. In the rare case this is needed it is because the factory wiring harness cannot supply the appropriate voltage required to power up the ballasts and properly ignite the HID capsules. Symptoms indicating the Wiring Harness Relay is required in conjunction with your HID Kit would be inconsistency with the HID lights turning on or the lights going out after being turned on for several minutes. The issue of the HID lights turning them selves off usually requires you to switch them off and back on to get them to turn back on again. This Harness will fix these issues. However If you're unsure you can always purchase it and return it for a full refund if you don't need it.
WARRANTY (3-Year) - There is a full-replacement 3-year warranty on all HID components, including HID Bulbs, Ballasts, and Relay Harness. We also honor a 30-day satisfaction guarantee on this HID kit.
**** When checking out online please add your year make and model vehicle in the notes ****
- Digital Slim HID Conversion Kit (3,000K Temp)
- Two 35w HYLUXTEK 2A88 Slim CAN-BUS Ballasts
- Two CNLighting HID Bulbs
- ASIC Controller Chip Technology
- Large 24kV External Igniter
- Built in Mounting Bracket w/ 3M Mounting Pads
- 3-Year Replacement Warranty